Cincinnati
(800) 736-3524
Columbus
(800) 784-1475
Lexington
(800) 844-2768
Louisville
(844) 287-3883

Table Mounted Router Bits

View as Grid List
Sort by

Amana Tool ® 45200 Straight Plunge High Production 1/8 Dia x 7/16 x 1/4 Inch Shank

Use a two-flute bit where fine finish is paramount. Two flutes balance the bit, eliminating vibration that degrades the cut finish. Two cuts per revolution yield a smooth surface, but feed rate is slightly reduced. 45200 features a solid carbide cutting edge.

Amana Tool ® 45750 Carbide Tipped V Groove 90 Deg x 1/2 Dia x 1/2 x 1/4 Inch Shank with Upper BB

Designed for fluting and 'V' grooving cuts guided by a template or pattern. The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the work piece. With a handheld router, the template must be on top of the work piece. With a table-mounted router, the template must be on bottom of the work piece. 90° ‘V’ Groove bit is for decorative purposes and is not intended for ‘miter-folding’, etc.

Amana Tool ® 45904 Carbide Tipped Core Box 1/8 Radius x 1/4 Dia x 1/4 x 1/4 Inch Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45906 Carbide Tipped Core Box 3/16 Radius x 3/8 Dia x 1/4 x 1/4 Inch Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45910 Carbide Tipped Core Box 1/4 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45918 Carbide Tipped Core Box 3/8 Radius x 3/4 Dia x 7/16 x 1/4 Inch Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45920 Carbide Tipped Core Box 3/8 Radius x 3/4 Dia x 7/16 x 1/2 Inch Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45924 Carbide Tipped Core Box 1/2 Radius x 1 Inch Dia x 5/8 x 1/4 Shank

Cut half-round grooves for fluted moldings, columns, millwork and signs using a core box bit. Used with an edge guide, it can cut coves. Can be used with handheld, table-mounted and CNC routers.

Amana Tool ® 45950 Carbide Tipped Core Box 1/4 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank with Upper BB

Designed for fluting and 'V' grooving cuts guided by a template or pattern. The shank-mounted ball-bearing pilot rides along the template edge, and the cutter duplicates the template contour in the work piece. With a handheld router, the template must be on top of the work piece. With a table-mounted router, the template must be on bottom of the work piece.

Amana Tool ® 46102 Solid Carbide Spiral Plunge 1/4 Dia x 3/4 x 1/4 Inch Shank Up-Cut

Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The ‘Up-Cut’ shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes, provide a superior finish and longer tool life, especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

Amana Tool ® 46106 Solid Carbide Spiral Plunge 1/2 Dia x 1-1/4 x 1/2 Inch Shank Up-Cut

Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The ‘Up-Cut’ shears from the bottom up, pulling chips from the bottom up, thus allowing deeper penetration with less stress on the tool. An excellent choice for mortising. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes, provide a superior finish and longer tool life, especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

Amana Tool ® 46202 Solid Carbide Spiral Plunge 1/4 Dia x 3/4 x 1/4 Inch Shank

Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The ‘Down-Cut’ cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes, provide a superior finish and longer tool life, especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

Amana Tool ® 46206 Solid Carbide Spiral Plunge 1/2 Dia x 1-1/4 x 1/2 Inch Shank Down-Cut

Spiral-flute bits combine a shearing action in cutting with an augering action in chip clearance. The shearing action yields an especially clean, accurate cut, while the augering action clears chips from the cut. The ‘Down-Cut’ cuts from the surface down, leaving a smooth edge at the surface. Special unique carbide grade, increased clearance geometry and razor-sharp cutting edges with polished flutes, provide a superior finish and longer tool life, especially in abrasive materials. Great for production settings and excellent for creating grooves and dado cuts in particleboard, plywood and laminate. Primarily used on CNC machines and other automatic routers. Can be used with handheld and table-mounted portable routers.

Amana Tool ® 49200 Carbide Tipped Roman Ogee 5/32 Radius x 1 Inch Dia x 5/8 x 1/4 Shank

The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in a handheld or table-mounted router.

Amana Tool ® 49204 Carbide Tipped Roman Ogee 1/4 Radius x 1-3/8 Dia x 13/16 x 1/4 Inch Shank

The Roman ogee bit, which has a convex curve coming off the bearing, produces the reverse of the ogee (it isn't an upside-down ogee). The curve starts at the top as a concave, and fairs down into a convex curve. Use in a handheld or table-mounted router.

Amana Tool ® 49300 Rabbeting 3/8 Depth x 1-1/4 Dia x 1/2 x 1/4 Inch Shank

This is the basic rabbeting bit. It cuts 3/8" wide and up to 1/2" deep. Switch to one of four optional ball-bearing guides to alter the width of cut. Use in a handheld or table-mounted router.

Amana Tool ® 49302 Rabbeting 3/8 Depth x 1-1/4 Dia x 1/2 x 1/2 Inch Shank

This is the basic rabbeting bit. It cuts 3/8" wide and up to 1/2" deep. Switch to one of four optional ball-bearing guides to alter the width of cut. Use in a handheld or table-mounted router.

Amana Tool ® 49340 Multi-Rabbet Six Different Rabbet Depths 1-3/8 Dia x 1/2 x 1/4 Inch Shank

The Multi-Rabbet bit steps in 1/16" increments from a 1/8" cut width to 1/2", simply by switching ball-bearing guides. Six different bearings are provided. Depth of cut capacity of 1/2". Use in a handheld or table-mounted router.

Amana Tool ® 49350 Multi-Rabbet Six Different Rabbet Depths 1-3/8 Dia x 1/2 x 1/2 Inch Shank

The Multi-Rabbet bit steps in 1/16" increments from a 1/8" cut width to 1/2", simply by switching ball-bearing guides. Six different bearings are provided. Depth of cut capacity of 1/2". Use in a handheld or table-mounted router.

Amana Tool ® 49360 Carbide Tipped Superabbet 2 Dia x 7/8 x 1/2 Inch Shank

This ingenious tool features both interchangeable cutting edges and an interchangeable guide collar, enabling you to cut a wide range of rabbets. Changing the collars on the twin ball-bearing guide steps the cut width in 1/16" increments from flush through 3/4" with five extra "plywood" sizes. Between the standard and optional collars, there are 18 different rabbet sizes available. The deep guide collar design adds stability to the tool for hand-held router operations. The basic 2"-diameter bit includes a hex key, instructions, and all necessary parts for 5/8" and 3/4" width rabbets. The "RC" version has extra-long double-edged carbide inserts which enables the bit to cut 30mm high. Inserts can be rotated or replaced without removing the bit from the router.

Amana Tool ® 49404 Carbide Tipped Chamfer 45 Degree x 1-31/32 Inch Dia x 3/4 x 1/2 Shank

Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles. For best results use in a router table. Will completely chamfer 3/4" material.

Amana Tool ® 49406 Carbide Tipped Chamfer 45 Degree x 2-3/8 Dia x 1 Inch x 1/2 Shank

Chamfer or bevel edges for decorative effect or to form edge miter joints. Produce crisp, uniform edges at accurate angles. For best results use in a router table. Will completely chamfer 1" material.

Amana Tool ® 49522 Carbide Tipped Corner Round 1 Radius x 2-1/2 Dia x 1-1/4 x 1/2 Inch Shank

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Maximum RPM 18,000. Use in a table-mounted router. Not for use in a handheld router! Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.

Amana Tool ® 49526 Carbide Tipped Corner Round 1-1/2 Radius x 3-1/2 Dia x 1-3/4 x 1/2 Inch Shank

The basic edge-forming bit, the corner-rounding bit rounds an edge to a given radius. The tool is shouldered to cut a fillet. The cut can be used to ease edges, as a simple profile, or as a part of a complex one. Also known as roundover, rounding over and quarter-round. If a smaller pilot bearing is used, a second shoulder can be produced, in effect making the bit a beading bit. Maximum RPM 15,000. Use in a table-mounted router. Not for use in a handheld router! Not guaranteed due to extreme diameter and radius. For best results it is recommended to use a smaller radius bit or chamfer the material prior to using these large radius tools. Tool life will be prolonged and a smoother finish will result.

Amana Tool ® 51432 Solid Carbide InVectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/2 Inch Shank

With Invectra™ router bits, kitchen fabricators, remodelers and construction workers can perform any kind of cut and trim job in aluminum laminates. Designed and tested for trimming all decorative aluminum laminates. Engineered from an Amana Tool® exclusive carbide grade designed specifically for cutting both aluminum laminates and wood-based substrate materials. Each bit is fitted with a steel bearing guide that enables users to trim laminate materials flush to the substrate, allowing you to perform any metal trim job to perfection!

Amana Tool ® 53400 Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 1/16 x 1/4 Inch Shank

Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and either a 1/4"-, 3/8"-, or 1/2"-shank arbor. Use in a handheld or table-mounted router. All assemblies include cutter, arbor and ball bearing.

Amana Tool ® 53406 Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 1/8 x 1/4 Inch Shank

Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and either a 1/4"-, 3/8"-, or 1/2"-shank arbor. Use in a handheld or table-mounted router. All assemblies include cutter, arbor and ball bearing.

Amana Tool ® 53410 Slotting Cutter Assembly 3 Wing x 1-7/8 Dia x 1/4 x 1/4 Inch Shank

Groove edges for T-moldings, splines or biscuits, and other purposes. Rout tongue-and-groove joinery. Slotting cutters are available with either 2-wing or 3-wing cutters. Each assembly includes a cutter, bearing for a 1/2" deep cut, and either a 1/4"-, 3/8"-, or 1/2"-shank arbor. Use in a handheld or table-mounted router. All assemblies include cutter, arbor and ball bearing.

Amana Tool ® 54102 Carbide Tipped Classical Bead & Cove 13/64 x 5/16 Radius x 1-1/4 Dia x 1/2 x 1/4 Inch Shank

This bead and cove combines the two basic forms, separating them with a fillet. The cove comes off the pilot bearing. Produce a complex profile in a single pass. Use in a handheld or table-mounted router.

Amana Tool ® 54117 Carbide Tipped Traditional Raised Panel 15 Deg x 1-7/16 Angle x 3-3/8 Dia x 1/2 x 1/2 Inch Shank

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended. Maximum RPM 14,000.

Amana Tool ® 54118 Carbide Tipped Ogee Raised Panel 3/4 Radius x 2-5/8 Dia x 5/8 x 1/2 Inch Shank

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended. Maximum RPM 20,000.

Amana Tool ® 54119 Carbide Tipped Cove Raised Panel 1-9/16 Radius x 3-3/8 Dia x 1/2 x 1/2 Inch Shank

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended.

Amana Tool ® 54121 Carbide Tipped Ogee Raised Panel 7/8 Radius x 3-3/8 Dia x 9/16 x 1/2 Inch Shank

Create raised panels for cabinet doors, frame-and-panel furniture, and architectural paneling with a raised-panel bit. The cutter forms a fillet to delineate the raised field, a shaped band around the field, and an integral tongue to fit the panel groove in the frame members. The profile contour and the reveal width varies. All tools have 1/2" shanks. Must be used in a table-mounted 3+ horsepower router and run at reduced speed. Use these bits for panels with curved edges. Multiple passes recommended. Maximum RPM 14,000.

Amana Tool ® 54160 Carbide Tipped Corner Round 1/8 Radius x 7/8 Dia x 9/16 x 1/4 Inch Shank

Produce three slightly different profiles using this bit - an edge bead with or without a fillet and a full corner bead - by altering the bit extension or rolling the work piece between passes. This group of hard-to-find tools is particularly suitable for antique reproductions and restoration projects. Use in a handheld or table-mounted router.

Amana Tool ® 55400 Carbide Tipped Tongue & Groove 3/8 Kerf x 1-5/8 Dia x 3/4 x 1/2 Inch Shank Assembly for 1/2 to 3/4 Material

Cut perfectly fitted tongue-and-groove joints on stock between 1/2" and 3/4" thick with a table-mounted router and this assembly. The tool consists of an arbor with an integral shank, two identical, removable slotting cutters, and a pair of bearings. To cut tongues, sandwich one bearing between the two cutters (as in drawing A). To cut slots, mount one cutter between the two bearings (as in drawing B). Can be used on 1/2" through 3/4" thick material.

Amana Tool ® 55430 Carbide Tipped 2-Piece Ogee Stile and Rail 1-5/8 Dia x 1-1/16 x 1/4 Radius x 1/2 Inch Shank Set

These sets include two trim cutters for stock 7/8" through 1" in thickness. (These trim cutters can be removed for making bearing-guided cuts on stock under 7/8" thick.) Use in a table-mounted router. Guide straight cuts with the fence, setting it tangent to the trim cutters. Use the pilot bearing only for cuts on curved rails or stiles; for cuts on curved parts 7/8" to 1" thick, a template must to used.

Amana Tool ® 55438 Carbide Tipped Adjustable Mission Style Straight Instile and Rail System 1-5/8 Dia x 13/64 to 1/2 x 1/2 Inch Shank Set

Bits in these sets have profile and groove or rabbet cutters and ball-bearing guide mounted on a 1/2" shank. Respacing of the components should only be necessary - using the provided shims - after the cutters have been resharpened. Guide straight cuts with the fence; use the pilot bearing only for cuts on curved rails or stiles.