Cincinnati
(800) 736-3524
Columbus
(800) 784-1475
Lexington
(800) 844-2768
Louisville
(844) 287-3883

Specialty

View as Grid List
Sort by
Display per page

Salice Silentia Smove- 200 Series 94˚ Opening Full Overlay (Arm 0)

Hinges with integrated soft-close mechanism in the hinge cup.

Technical Information: Hinges for min. 18 mm thick doors.

15.5 mm deep cup. 94° opening.

Possible drilling distance on the door: from 3 to 9 mm.

Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates.

Salice Silentia Smove- 200 Series 94˚ Opening Half Inch Overlay(Arm 9)

Hinges with integrated soft-close mechanism in the hinge cup.

Technical Information: Hinges for min. 18 mm thick doors.

15.5 mm deep cup. 94° opening.

Possible drilling distance on the door: from 3 to 9 mm.

Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates.

Salice Silentia Smove- 200 Series 94˚ Opening Half Overlay(Arm 5)

Hinges with integrated soft-close mechanism in the hinge cup.

Technical Information: Hinges for min. 18 mm thick doors.

15.5 mm deep cup. 94° opening.

Possible drilling distance on the door: from 3 to 9 mm.

Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates.

Salice Silentia Smove- 200 Series 94˚ Opening Inset (Arm 17)

Hinges with integrated soft-close mechanism in the hinge cup.

Technical Information: Hinges for min. 18 mm thick doors.

15.5 mm deep cup. 94° opening.

Possible drilling distance on the door: from 3 to 9 mm.

Compatible with all traditional Series 200 mounting plates and with all Domi snap-on mounting plates.

Salice Smove D005SN - White

Insert or adapt Smove D005 into the cabinet side opposite the hinges.

For optimum performance, we suggest to position the Smove D005 in the center of the side panel.

It is suggested for doors from 18" to 24" width. For wood and aluminum doors over 63" height, it may be necessary to use two Smoves, one to be inserted into the upper part and the second into the lower part of the cabinet side opposite the hinges.

A test assembly is strongly suggested relative to variables in door size and overlay.

Salice Smove D006SN - White

Insert or adapt Smove D006 at the enter of each door opening (top or bottom panel).

Before assembly, we suggest the use of our Test Block to test for optimum performance of the D006 Smove and to select the best operating position.

For wood and aluminum framed doors over 63" in height, it may be necessary to use two Smoves, one to be inserted into the top and the other into the base panel of the cabinet.

Salice Smove Die-Cast Adapter - D076SN9

Die-cast adapter for Smove D005, D006, D007, and D008.

-To be attached with wood screw.

-Without front indexing tab.

Salice Smove Die-Cast Adapter - D076XX9R

Die-cast adapter for Smove D005, D006, D007, and D008.

To be attached with wood screw.

- Without front indexing tab.