Cincinnati
(800) 736-3524
Columbus
(800) 784-1475
Lexington
(800) 844-2768
Louisville
(844) 287-3883

Hand-held Router Bits

View as Grid List
Sort by

Amana Tool ® 45460-S Carbide Tipped Dado Clean Out 1/2 Dia x 1/4 x 1/4 Inch Shank with Upper BB

Bits are designed with a 1/4" cutting edge for dado clean-out. Also used in hardwood and flooring medallions.

Amana Tool ® 45461 Carbide Tipped Flush Trim Plunge Template 1/2 Dia x 1-1/4 x 1/4 Inch Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45462 Carbide Tipped Flush Trim Plunge Template 5/8 Dia x 1 Inch x 1/4 Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45464 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1 Inch x 1/4 Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45465 Carbide Tipped Flush Trim Plunge Template 3/4 Dia x 1-3/4 x 1/2 Inch Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work.

Amana Tool ® 45467 Carbide Tipped Flush Trim Plunge Template 1 Inch Dia x 1-3/4 x 1/2 Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work. Maximum RPM 20,000.

Amana Tool ® 45468 Carbide Tipped Flush Trim Plunge Template 1-1/8 Dia x 1-1/2 x 1/2 Inch Shank with Upper BB

This bit is essentially a plunge-cutting straight with a shank-mounted ball-bearing pilot. Versatile, useful for template/pattern routing of parts, joints, internal cuts and can be used in handheld and table-mounted routers. The template is attached to the workpiece, and the pilot bearing rides along its edge as the cutting edges rout the workpiece, forming an exact duplicate of the template. With a handheld router, the pattern is on top of the work; with a table-mounted router, the pattern is underneath the work. Maximum RPM 20,000.

Amana Tool ® 46300 Solid Carbide UltraTrim Spiral 1/2 Dia x 1-1/4 x 1/2 Inch Shank with Double Lower Ball Bearing Up-Cut

For the ultimate, chip-free finish in laminate, melamine, solid surface, fragile veneers and for template work of all kinds. The twin ball-bearing pilot enhances the stability of the tool. Available in 'Up-Cut' and 'Down-Cut' spirals.

Amana Tool ® 47090 Carbide Tipped Flush Trim 1/4 Dia x 1/2 x 1/4 Inch Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size.

Amana Tool ® 47092 Carbide Tipped Flush Trim 1/4 Dia x 1 Inch x 1/4 Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work. 1/4" diameter for closer inside corner cutting only; bearings not guaranteed due to size.

Amana Tool ® 47100 Carbide Tipped Flush Trim 3/8 Dia x 1 Inch x 1/4 Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47102 Carbide Tipped Flush Trim 3/8 Dia x 1/2 x 1/4 Inch Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47104 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47105 Carbide Tipped Dynabit Laminate Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank

The Dynabit™ line features a modest down-shear for an excellent finish. The helix bits have a spiral-like twist to the cutting edges, making them especially good on difficult materials such as melamine. An adhesive-trapping gap between cutting edges and pilot bearing is featured on tools #47111 & #47113.

Amana Tool ® 47106 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank

Use this flush trimming bit for laminate work or for template and pattern work. For template application, the bearing follows the template, while the cutting edges trim the workpiece. With the router handheld, the template is on the bottom of the work. With a table-mounted router, the template is on top. A two-flute bit is a good general-purpose choice, providing fast cuts and good finishes. Excellent for template work.

Amana Tool ® 47114 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/4 Shank 3-Flute

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47116 Carbide Tipped Flush Trim 1/2 Dia x 1/2 x 1/4 Inch Shank 3-Flute

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47118 Carbide Tipped Flush Trim 1/2 Dia x 1 Inch x 1/2 Shank 3-Flute

For an extremely smooth finish, choose the three-flute configuration. It is especially good to use on laminates that tend to chip easily.

Amana Tool ® 47124 Carbide Tipped Flush Trim 1/2 Dia x 1-1/2 x 1/2 Inch Shank

Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.

Amana Tool ® 47126 Carbide Tipped Flush Trim 1/2 Dia x 2 Inch x 1/2 Shank with Double Ball Bearing

Use this bit for template or pattern work where the workpiece is unusually thick. The two-flute configuration cuts fast and produces a smooth finish. For a superior finish, use the three-flute version. Twin bearings on selected tools provide better contact with reference edge and more stability in the cut.

Amana Tool ® 47150 Carbide Tipped No-File Trim .059 Radius x 1/2 Dia x 3/8 x 1/4 Inch Shank

Eliminate the time-consuming hand-filing that normally follows each trimming cut on a laminate job. Our No-File™ bit "breaks" the sharp edge as it trims the laminate flush. When used properly, the resulting edge is smooth and has a slight radius.

Amana Tool ® 47160 Carbide Tipped Flush Trim V Groove 5/8 Dia x 1 Inch x 1/4 Shank

Trim the edges of face frames flush with cabinet sides with this bit. At the same time, cut a decorative 'V' groove to conceal the seam between the frame and the case.

Amana Tool ® 47180 Carbide Tipped Dynabit Laminate Trim, Flush Helix 5/8 Dia x 5/8 x 1/4 Inch Shank

The Dynabit™ line features a modest down-shear for an excellent finish. The helix bits have a spiral-like twist to the cutting edges, making them especially good on difficult materials such as melamine. An adhesive-trapping gap between cutting edges and pilot bearing is featured on tools #47111 & #47113.

Amana Tool ® 47200 Carbide Tipped Bevel Laminate Trim 15 Deg x 5/8 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing

This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.

Amana Tool ® 47202 Carbide Tipped Bevel Laminate Trim 25 Deg x 3/4 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing

This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.

Amana Tool ® 47204 Carbide Tipped Bevel Laminate Trim 45 Deg x 1-3/32 Dia x 1/4 x 1/4 Inch Shank with Ball Bearing

This is a steel-bodied, carbide-tipped bit for bevel trimming laminate with a standard router. The solid construction reduces vibration for the smoothest cut possible with a two-flute bit.

Amana Tool ® 47300 Carbide Tipped Bevel Laminate Trim 22 Deg x 15/16 Dia x 7/16 x 1/4 Inch Shank with Ball Bearing 3-Flute

The solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut. Intended for use in a standard router.

Amana Tool ® 47302 Carbide Tipped Bevel Laminate Trim 7 Deg x 3/4 Dia x 7/16 x 1/4 Inch Shank with Ball Bearing 3-Flute

The solid construction of this carbide-tipped bit reduces vibration, and its three-flute configuration produces a very smooth cut. Intended for use in a standard router.

Amana Tool ® 47400 Carbide Tipped 4 Wing Flush Trim Single Bevel Cutter Assembly 7/8 Dia x 1/4 x 1/4 Inch Shank

An assembly offers the option of switching cutters - from flush trim to either of two bevel trims - without removing the bit from the router or even changing the depth-of-cut setup. Four flutes yield a smooth, crisp cut finish.

Amana Tool ® 51200 Solid Carbide Panel Pilot Flush Trim 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute

The ideal laminate trimming bit for high-volume production. Solid carbide and integral pilot (no bearing to maintain) extend life of bit, slim configuration reduces vibration. Suitable for routers and trimmers.

Amana Tool ® 51202 Solid Carbide Panel Pilot Bevel Trim 7 Degree x 1/4 Dia x 1/4 x 1/4 Inch Shank 1-Flute

The ideal laminate trimming bit for high-volume production. Solid carbide and integral pilot (no bearing to maintain) extend life of bit, slim configuration reduces vibration. Suitable for routers and trimmers.

Amana Tool ® 51432 Solid Carbide InVectra Aluminum Laminate Trim 1/4 Dia x 5/8 x 1/2 Inch Shank

With Invectra™ router bits, kitchen fabricators, remodelers and construction workers can perform any kind of cut and trim job in aluminum laminates. Designed and tested for trimming all decorative aluminum laminates. Engineered from an Amana Tool® exclusive carbide grade designed specifically for cutting both aluminum laminates and wood-based substrate materials. Each bit is fitted with a steel bearing guide that enables users to trim laminate materials flush to the substrate, allowing you to perform any metal trim job to perfection!